Steel Supplied, Cut & Drilled to Your List
Send your cut list — we supply the steel, cut it to length and drill the holes, slots and mitres, all to structural tolerance. Heavy sections up to 900 mm on our new KL90010-T laser, with mill-cert traceability. A structural fabricator processing your steel — not a rough merchant yard.
Get it priced
Cut list, DXF/STEP or a marked-up drawing — we'll price it against actual cycle time.
Most merchants sell you the section. We cut and drill it too.
Skip the second vendor for cutting, the third for drilling and the rough flame-cut edges. Your steel arrives cut to length, holes to pattern, weld-ready — from one accountable Melbourne workshop.
Supply, cut and drill — to your exact list
Steel Supply, with mill certs
Structural sections supplied from stock — beams, columns, channels, angles, tube and plate — or sourced fast from the major distributors we sit beside in Dandenong. Prefer to bring your own? BYO steel welcome; we record the mill cert either way.
- Grade 300/350 to AS/NZS 3679, mill certs supplied
- Carbon, stainless (304/316) & aluminium
- Or supply your own — full traceability kept
Cut to length, mitre & bevel
Precise cut-to-length to your list — square, angled or ±45° weld-prep bevel — up to 13.5 m in a single pass on the KL90010-T. Automatic cross-section detection means mixed profiles run as one job, with clean edges straight off the machine.
- Straight, mitre & bevel in a single pass
- Up to 13.5 m — no segmentation or re-welding
- Plasma & saw for plate and heavy sections
Holes, slots & hole patterns
CNC drilled bolt holes, slot patterns, copes and notch features to your drawing — cut in the same setup as the length, so parts land weld-ready and repeatable. No manual marking, no second-stage handling.
- CNC drilling & punching to pattern
- Copes, notches & end-plate detailing
- Repeatable across batch runs
Cut and drilled in-house — nothing sent out
Cutting, bevelling and hole work are done on our own 5-axis CNC tube laser, so your cut list is never sub-contracted and it is held to the same tolerances we use on our own fabrication work.
Full laser tube cutting specs & capabilities →Across the full structural range
Send your cut list against any of these — supplied, cut and drilled to size within the machine envelope.
Galvanised sections we carry
These lines are listed and sold direct from the Dandenong workshop. Anything outside them is bought in and processed against your cut list.
- Galvanised lintels — T sections 150×10, 200×10 and 250×12 over 200×10 H; 100 EA angles in 8 mm and 10 mm.
- Galvanised angles & flat bar — 150×100 UA in 10 mm and 12 mm; 200×10 flat bar.
- Retaining wall steel — 100 PFC and 150 PFC C sections, 90° and 135° corners, 100 UC and 150 UC H sections.
Galvanised lintels & angles · Retaining wall steel
From cut list to finished steel — in days
Send Your List
Cut list, DXF/STEP or a marked-up drawing — sections, lengths, holes, quantities and finish.
Priced From Your List
Priced on actual cycle time + material — not a flat rate per metre. Volume discounts on nested runs.
Supply · Cut · Drill
We supply (or take your steel), cut to size, drill and bevel — mill cert filed against your job.
Pick Up or Deliver
Collect from Dandenong or we deliver Melbourne-wide — or bundle with fabrication.
Merchant-grade supply, engineering-grade processing
Structural tolerance
Cut and drilled to engineer's drawing, not rough merchant tolerance — straight to the welder.
AS/NZS credentials
Backed by AS/NZS 1554.1 welding and CC2 to AS/NZS 5131 — quality the supply yards can't match.
One roof
Supply, cut, drill, weld and finish in one Dandenong workshop — one timeline, one contact.
Full traceability
Mill certificates, cut lists and inspection records tagged to your order and supplied on request.
Steel supply & processing — your questions
Can you supply the steel, or do I bring my own?
Do you cut to my exact lengths and cut list?
Can you drill holes, slots and hole patterns?
What sizes and sections can you process?
Do you provide mill certificates and traceability?
How fast, and can I collect or have it delivered?
Send your cut list for a quote
Sections, lengths, holes, quantities and finish — send it over and we'll price it on cycle time and confirm we can supply and process it. Talk to a fabricator, not a counter salesperson.